DIY CNC machine? Build it yourself!

A CNC machine is basically a router  that moves in all three axes over top of a material to carve out the shape that you desire.  The router is controlled by a computer so that very precise and consistent cuts can be made.  I have wanted a CNC machine for about 10 years now, so what’s stopping me? Well they cost about $10,000. So until I have a lucrative furniture design business, this isn’t likely going to happen.

Unto this Last makes all of their creations using a large format CNC machine. The materials are plywood or other sheet goods and the computer optimally cuts out all the pieces.  This is a key element to their products as they can arrange the cuts so as to not waste any material whatsoever.

In the last issue of Make magazine, they had an article about DIY CNC machines. These very precise instruments were something that I had never dreamed were possible to be made at home, however the author assured the readers that they are not only possible to make, but fairly simple in their construction. I was absolutely hooked, I read the article about 10 times…

My next step was to visit their website where they had vast tutorials and how to’s involving DIY CNC machines.  The site is being constantly updated and has tons of helpful stuff on it.  It’s nice to see feedback from other DIYers saying what works/doesn’t work on their machines and simple work arounds.

Finally I couldn’t help myself, I went online and bought their newly written book Build Your Own CNC Machine.  I’ve read it all the way through already!  The book is well laid out with easy to follow instructions as well as helpful suggestions on where to buy some of the more hard to find parts (motors, etc.).  The design in the book is for a 2’x4′ machine, however the website shows bigger versions as large as 4’x8′.

So what’s my next step? Well, I obviously can’t get started on this till after our Parisian excursion, but I’m planning on building this in the fall. I’ve already set aside some money for the electronics, while I have most of the wood already laying around the garage.  I’d like to see if I can upscale the design to build it for a 5’x5′ sheet so that I could use sheets of baltic birch.

Over the summer I plan to do some reading and playing with CAD programs as well as work on some designs to test out the new machine once it’s built.